3500kg Lovells GVM Upgrade Kit to suit Toyota Hilux GUN,GGN 2015-on
After you have purchased this GVM kit, someone from our team of suspension experts will call you to confirm your order details, your requirements, and your vehicle specifications. All to ensure that we give you the right product. If you purchase this lift kit using our click & fit service, we will confirm your installation date at the same time.
High Level Product Details
GVM Kits will only be shipped directly to our certified dealers and can only be installed by an authorised and approved Fulcrum Suspension Workshop.
Shown Price includes fitting by an authorised Fulcrum Workshop.
GVM Certified Locations: Arndell Park, Bundaberg, Capalaba, Coopers Plains, Fraser Coast, Gladstone, Gold Coast, Hillcrest, Ipswich, Rockhampton & Springwood.
- 100% legal, engineered, road tested, approved and certified.
- Suitable for Mining Companies, Farmers, Tradesmen, Tourers and offroad enthusiasts
- Vehicle warranty is not affected when a GVM Upgrade is fitted.
- Tested, assembled and built in Australia
- All our GVM upgrade kits are inclusive of installation labor cost, but exclude vehicle wheel alignment cost. Wheel alignment and consumables will be charged at checkout.
Lovells GVM (Gross Vehicle Mass) Upgrades
This kit will suit any vehicle owner/operator who has a need to carry greater loads.
This includes Offroad enthusiasts Government Departments, Mining Companies, Farmers, Tradesmen, large and small businesses, even individuals loading their vehicles for travelling.
Many tradies and off road enthusiasts who are either required to carry heavy loads for work or have custom rigs with lots of load bearing accessories, run into the issue where they exceed the vehicles factory payload specifications or GVM. The usable payload for many 4WD's is minimal, reaching and or exceeding the limits of your 4WD's GVM is a very common issue. A Lovells GVM Upgrade kit solves this, by legally and safely increasing the vehicles maximum GVM.
The average 4WD owner will often carry basic equipment, two or three adult male occupants and or will tow some form of trailer. By doing the previous mentioned basics without even carrying additional accessories, the average 4WD will find itself reaching its legal maximum weight or Gross Vehicle Mass (GVM). When a 4WD owner decides to add additional accessories such as a long-range fuel tank, a bull bar, a winch, side steps, roof racks, recovery gear and a payload of camping equipment or an industrial type custom body. Or if the 4WD is a work vehicle and carries extreme weight, the vehicle will ultimately exceed the Original Vehicle Manufacturers allowable Gross Vehicle Mass (GVM).
Original factory suspension or OE (Original Equipment) suspension is designed for comfort above all other considerations, thus load carrying and performance can be compromised.
- Lovells GVM Upgrade kits are fully certified, track tested and road tested ensuring full qualification of Australian standards and legal requirements.
- This Lovells GVM Upgrade kit has been tested over many days under the strict supervision of a Certified Automotive Engineering Signatory to achieve maximum stability, braking performance, ADR (Australian Design Rules) conformity and operator comfort.
- All Lovells GVM upgrade kits and documentation have been reviewed and approved by the Department of Infrastructure, Transport, Regional Development and Local Government.
Lovells GVM Upgrade Kits provide a solution for owners/managers of either a Toyota Landcruiser, Toyota Hilux or Nissan Patrol who have a need to carry loads which exceed the Original Equipment GVM specifications while at the same time meet the practical and documentary compliance requirements of Work Safety, Police Licensing, Insurance, Lessors and Fleet Managers.
When and why do vehicles require GVM (Gross Vehicle Mass) suspension upgrades?
- You need to protect your business or employees from claims for breaches of OH&S rules and employee negligence.
- Avoid possibility of Insurance companies voiding payout if the vehicle is loaded beyond approved GVM.
- Avoid possibility of litigation under common law if the vehicle is operated beyond its legal load limits.
- You want to safely and legally meet the set requirements to load and safely operate your vehicle with weight beyond current Original Equipment limits for heavy extreme heavy loads and/or remote work.
This GVM Kit includes the following:
- 2 x Lovells Heavy Duty Front Coil Springs
- 2 x Lovells Heavy Duty Rear Leaf Springs
- 2 x Lovells Front Gas Legend Twin tube, Long Travel Gas Shock Absorbers
- 2 x Lovells Rear Gas Legend Twin tube, Long Travel Gas Shock Absorbers
- 3 x Lovells Urethane bush kits to suit leaf spring eyes and shackles.
- 4 x Lovells Hi-Tensile U-Bolts
- 2 x Lovells Greasable Shackles
- 2 x Lovells Greasable Pins
- 1 x Rear brake line extension kit
- 1 x Headlight adjusting rod kit (SR5 only)
- 1 x Federal Compliance plate with revised GVM (Pre-Registration Vehicles)
OR
- 1 x State Compliance GVM Upgrade Modification Plate (Registered Vehicles)
- 1 x Re-Tension U-Bolts Warning Decal
- 1 x Tyre Loading Placard (Decal) with revised axle capacities
- 2 x Lovells Rear Mudflaps
- 1 x GVM Upgrade Owners Manual
- 1 x Fitting Instruction Manual
When purchasing this GVM kit, as per state legislation vehicle engineering is required. This is completed by an engineer who signs off on the installation of the GVM upgrade kit and then provides a mod plate for your vehicle.
For pre-rego vehicles (before the vehicle is registered) there is no charge for this service.
For post-rego vehicles (vehicles that are already registered) there is an additional cost for this as the data for your already registered vehicle needs to be changed and a new mod plate needs to be assigned to the already registered vehicle. When purchasing this GVM kit from us on our website we allow you to choose whether your vehicle is post/pre rego and also showing the related engineering costs.
*All prices shown on the Fulcrum website include GST. You will not be charged any additional fees related to tax.
Product Stock
Please be advised that our stores do not hold any stock. In order to make sure things go as fast as possible you can purchase your parts online. If you would like to have your parts installed by us please choose Click & Fit at the checkout.
You can use the shipping calculator to find your shipping costs, your closest pick up or install locations. The shipping calculator will also show all shipping and installation prices. Shipping is free if you choose to get your item installed by us.
When our product stock levels are low, or current stock is allocated to orders, our website may show an ‘in-stock’ status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details.
Delivery Methods
1. Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything for you and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
2. Select “Free Pickup” as a delivery method during the checkout process and you will be given free delivery to your nearest Fulcrum outlet where you can collect the parts. We will text and email you all your tracking details.
3. Select “Deliver to Door” as a delivery method during the checkout process and we will deliver your order direct to your nominated delivery address. We will text and email you all your tracking details.
We offer FREE shipping to all metro areas (excluding WA, TAS and NT).
If you live on the Australian coast, that does not mean you are subject to free shipping.
Express shipping times and free shipping times are only to be counted once the order has been shipped from our warehouses. Our free shipping and express shipping services both have the same order processing times. We first have to raise the order, then we send it to one of our warehouses for processing and once ready it will be shipped from the warehouse. The difference between express and free shipping services, is the time it takes for the item to be transported from our warehouse to your address.
Our free shipping policy is determined by densely populated metro locations and the viability of distance travelled from our distribution centres. We are constantly expanding our warehousing, so areas covered by free shipping are subject to change. See our shipping policy here.
We guarantee the fitment and quality of our products, but if you choose to return an item we offer a generous 60 day returns policy. See our returns policy here.
All products sold by Fulcrum Suspensions are covered by a national warranty. This products warranty is subject to conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Fulcrum Suspensions with a receipt to be eligible for a refund. See full warranty claim criteria here.
Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
Your assigned suspension expert will confirm all the details for your booking. Your parts will then be delivered to your closest Fulcrum outlet and an installation date will be booked based on your preference. You then bring your car on the booking date and Fulcrum will manage the installation for you.
Installation includes full product installation by a qualified suspension technician, a full wheel alignment, a complete suspension check, a visual brake inspection, and a complete report. We also offer a complimentary 1000km check-up service, which includes a suspension check and any retention work, your alignment and tyre wear will also be checked. If we find that anything needs to be amended during our 1000km check, we will carry out this work free of charge. This includes a wheel alignment, if required.
Throughout your order, installation, and service. You will be kept up to date every step of the way. Fulcrum offers this service to ensure you get the best possible experience.