We teamed up with 4WD Action to create an easy to understand guide on how to install your own lift kit. Now if you don’t feel comfortable around tools or don’t want to be held liable for the work done on your car, we strongly recommend you let the professionals do the job for you. Be that as it may, this guide is very straight forward and if you have some knowledge you should be able to install your lift kit with ease.
If...
Continue Reading...CHAL-007
Mitsubishi Challenger PB 2010-on 2 Inch 50mm Bilstein 4x4 Lift Kit

In stock
$1,539.00
Available In stock for immediate delivery.
FREE SHIPPING TO ALL AUSTRALIAN METRO
LOCATIONS + 365 DAY RETURN POLICY
LOCATIONS + 365 DAY RETURN POLICY
- All weather multi lip seal and oil for consistent performance in all types of conditions
- Re-coil cut off to avoid internal shock absorber damage at full articulation
- Hardened polished chromerod to improve longevity and seal wear
- Expanded body for extra capacity
- Nitrogen gas to resist shock absorber fade
- Bonded rubber lower bushes for extra articulation and longevity
- Increased oil capacity
- High temperature oil to maintain viscosity under hard working conditions
- 3 Years/60000km Warranty
Bilstein Performance Kit designed to lift the vehicle 50mm and provide the ultimate in handling and control, both on and off road.
Where applicable the spring rates of this lift kit can be adjusted to handle different front and rear loads. If you would like to change the specified spring rates of this lift kit, please give us a call, send us a message or leave a comment when you purchase this 4x4 lift kit.
Application | Performance Kit |
---|---|
Brand | Bilstein |
Front Load | No Bull Bar/Alloy Bull Bar |
Front Load | Steel Bull Bar |
Front Load | Steel Bull Bar & Winch |
Kit Position | Front and Rear |
Lift (mm) | 0-40 |
Rear Load | 150kg |
Required Wheel Alignment | 4WD |
Use Type | Performance |
Foot Note 1 | Please note matching spring rates with your vehicles weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you should get. Then please send us a message or call us to make sure you get the right spring rate. |
Foot Note 2 | Kit Contains 4 x Bilstein shock absorbers, Springs are King Spring Coils. |
Components Per | 1 Kit |
Sub brand | Fulcrum 4x4 |
Product Note | This kits default rear spring rate has been specifically designed for use on vehicles that have no constant load. |
MITSUBISHI | CHALLENGER | 07/08-12/15 PB,PC Closed Off-Road Vehicle 2.5 DI-D 4WD (KH4W) |
MITSUBISHI | CHALLENGER | 2008-on PB |