3325kg Lovells Touring GVM Upgrade Kit to Suit Isuzu MU-X RJ 4WD 3.0L Diesel 07/2021-On
Increase your Isuzu MU-X’s legal load-carrying capacity, suspension control and touring capability with the Lovells 3325kg Touring GVM Upgrade Kit.
Designed for Isuzu MU-X RJ 4WD models fitted with the 3.0-litre diesel engine from July 2021 onwards, this engineered suspension upgrade increases the vehicle’s GVM from 2800kg to 3325kg. It also revises the approved GCM from 5900kg to 6200kg (only for NSW & VIC), providing greater flexibility when carrying passengers, permanent accessories, touring equipment and other essential loads.
The upgrade combines Lovells heavy-duty coil springs with Gas Legend twin-tube shock absorbers to improve stability, body control and ride quality under load. It is ideal for touring, towing, commercial use and recreational off-road driving without compromising everyday usability.
Key Benefits
- Increases GVM from 2800kg to 3325kg
- Provides up to 525kg of additional approved GVM capacity
- Increases the front axle rating from 1450kg to 1575kg
- Increases the rear axle rating from 1650kg to 1750kg
- Revises GCM from 5900kg to 6200kg (NSW & VIC)
- Maintains the original 3500kg maximum towing capacity
- Improves suspension control, stability and comfort under load
- Helps reduce suspension sag with correctly matched constant loads
- Suitable for touring, towing, off-road and commercial applications
- Engineered and tested to meet applicable Australian approval requirements
Lovells Approved Ratings
- Front axle rating: 1575kg
- Rear axle rating: 1750kg
- Gross Vehicle Mass: 3325kg
- Towing capacity: 3500kg
- Gross Combination Mass: 6200kg
Original Vehicle Ratings
- Front axle rating: 1450kg
- Rear axle rating: 1650kg
- Gross Vehicle Mass: 2800kg
- Towing capacity: 3500kg
- Gross Combination Mass: 5900kg
The revised GCM does not increase the vehicle’s maximum towing capacity above 3500kg. All GVM, GCM, axle, towing and tow-ball limits must be observed at the same time.
Kit Contents
- 2 x Lovells heavy-duty front coil springs
- 2 x Lovells heavy-duty rear coil springs
- 2 x Lovells front Gas Legend twin-tube shock absorbers
- 2 x Lovells rear Gas Legend twin-tube shock absorbers
- 1 x Federal Secure Vehicle Identification Placard and RAV system upload for eligible pre-registration vehicles
- 1 x tyre loading placard with revised axle capacities
- 1 x GVM Upgrade Owner’s Manual
- 1 x fitting instruction manual
Important Fitment Information
This kit suits Isuzu MU-X RJ 4WD 3.0-litre diesel models manufactured from July 2021 onwards.
Correct spring selection depends on the vehicle’s permanent accessories, regular load and intended use. Constant loads may include bull bars, winches, batteries, underbody protection, drawers, roof racks, recovery equipment and other items permanently fitted to or carried in the vehicle.
After purchase, a Fulcrum Suspensions specialist will contact you to confirm your vehicle details, accessories, load requirements, towing needs and registration status before processing the order.
Installation and Certification
A GVM upgrade is only legally recognised when the approved kit is professionally installed, inspected and certified under the applicable federal or state approval process.
Pre-registration vehicles may be completed under the applicable federal approval pathway, including the revised Secure Vehicle Identification Placard and upload to the Register of Approved Vehicles.
Vehicles that are already registered require state-based engineering approval and a modification plate. Additional engineering and certification costs may apply depending on the vehicle’s registration status and state or territory requirements.
This kit must be delivered to and installed by an authorised GVM upgrade workshop. The displayed price includes installation by an authorised Fulcrum Suspensions workshop unless otherwise stated.
Purchase through our Click & Fit service to select a participating installer. Our team will then confirm the correct configuration, certification pathway and installation booking.
Upgrade your MU-X for greater touring and load-carrying capability. Order the Lovells 3325kg Touring GVM Upgrade Kit today, and our suspension specialists will manage the fitment and certification requirements with you.
GVM Lift Kit
Upgrade your 4WD’s load-carrying capacity, ride height and suspension performance with a professionally engineered GVM Lift Kit.
A Gross Vehicle Mass, or GVM, upgrade increases the maximum permitted operating weight when the kit is correctly installed, inspected and certified. This provides additional capacity for passengers, permanent accessories, tools, touring equipment and other essential loads.
Unlike a standard suspension lift, a GVM Lift Kit is developed as a complete suspension package. Matched springs, shock absorbers and supporting components work together to improve load control, ride quality, stability and handling on sealed roads, corrugations and off-road terrain.
Key Benefits
- Increased legal load-carrying capacity when approved and certified
- Improved ride height and ground clearance
- Better stability and body control under load
- Reduced suspension sag with correctly matched springs
- Improved handling across touring, towing, work and off-road conditions
- Heavy-duty springs and matched shock absorbers
- Application-specific components for reliable performance
Correct spring selection is essential. Permanent accessories and constant loads, including bull bars, winches, batteries, canopies, drawers, tools and recovery equipment, must be considered when configuring the kit.
After purchase, a Fulcrum Suspensions specialist will confirm your suspension setup, permanent load, towing requirements and intended use before processing the order.
Professional installation, wheel alignment and certification are required. A GVM upgrade does not increase Gross Combined Mass, axle ratings or towing capacity unless specifically included in the applicable approval.
Increase your carrying capacity with a suspension package engineered for the job. Order your GVM Lift Kit today, and our team will confirm the correct configuration before installation.
*All prices shown on the website include GST. You will not be charged any additional fees related to tax. For international orders, GST is removed, local import duties or taxes may apply but will not be charged by us.
Product Stock
Please be advised that our stores do not hold any stock. In order to make sure things go as fast as possible you can purchase your parts online. If you would like to have your parts installed by us please choose Click & Fit at the checkout.
You can use the shipping calculator to find your shipping costs, your closest pick up or install locations. The shipping calculator will also show all shipping and installation prices. Shipping is free if you choose to get your item installed by us.
When our product stock levels are low, or current stock is allocated to orders, our website may show an ‘in-stock’ status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details.
Delivery Methods
1. Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything for you and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
2. Select “Free Pickup” as a delivery method during the checkout process and you will be given free delivery to your nearest Fulcrum outlet where you can collect the parts. We will text and email you all your tracking details.
3. Select “Deliver to Door” as a delivery method during the checkout process and we will deliver your order direct to your nominated delivery address. We will text and email you all your tracking details.
We offer FREE shipping to all metro areas (excluding WA, TAS and NT).
If you live on the Australian coast, that does not mean you are subject to free shipping.
Express shipping times and free shipping times are only to be counted once the order has been shipped from our warehouses. Our free shipping and express shipping services both have the same order processing times. We first have to raise the order, then we send it to one of our warehouses for processing and once ready it will be shipped from the warehouse. The difference between express and free shipping services, is the time it takes for the item to be transported from our warehouse to your address.
Our free shipping policy is determined by densely populated metro locations and the viability of distance travelled from our distribution centres. We are constantly expanding our warehousing, so areas covered by free shipping are subject to change. See our shipping policy here.
We guarantee the fitment and quality of our products, but if you choose to return an item we offer a generous 60 day returns policy. See our returns policy here.
All products sold by Fulcrum Suspensions are covered by a national warranty. This products warranty is subject to conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Fulcrum Suspensions with a receipt to be eligible for a refund. See full warranty claim criteria here.
Click & Fit Guideline
Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
Your assigned suspension expert will confirm all the details for your booking. Your parts will then be delivered to your closest Fulcrum workshop and an installation date will be booked based on your preference. You then bring your car on the booking date and the Fulcrum workshop will install your order.
Installation includes full product installation by a qualified technician, a full wheel alignment, a complete suspension check, a visual brake inspection, and a complete report. We also offer a complimentary 1000km check-up service, which includes a suspension check and any retention work, your alignment and tyre wear will also be checked. If we find that anything needs to be amended during our 1000km check, we will carry out this work free of charge. This includes a wheel alignment, if required. Please note that Fulcrum Dealers are independant workshops and may not supply a full suspension report or offer a 1000km checkup. Workshops that are owned by Fulcrum Suspensions will do this for you though.
Throughout your order, installation, and service. You will be kept up to date every step of the way. Fulcrum offers this service to ensure you get the best possible experience.
Installation timing
Most installs occur within 2 weeks. Timing depends on workshop availability, stock levels, and shipping lead times. This 2-week timeframe is not guaranteed. For WA customers, extra transit time from the east coast may push appointments back.