TEIN Service & Repairs

We repair, rebuild, re-valve and customise TEIN Coilovers, call 1800 385 278


Revalving Price: $190 per unit

Remanfacture Price: $150.00 plus any additional parts as required.


The most common question Fulcrum is asked is to vary the spring rate of coilovers, but what is mostly forgotten is the re-valve of the damper. TEIN recommend that if the spring rate is altered by more than 2kg/mm, either up or down, a re-valve is required. This ensures that the damper and spring are matched for optimum performance.


The charge to re-valve or change damper rates is $190.00 per unit.

Re-valve price includes:

  • Shock Dyno test before & after.
  • Re-valving & new oil seals.
  • New oil & a gas recharge.

 fulcrum suspensions tein coilover spring rate change

Changing the spring rate of a TEIN coilover at Fulcrum suspensions reman facility.


TEIN Coil overs are designed and built to be remanufactured and returned to TEIN’s original specifications. All internal parts are carried as stock lines; however damaged strut bodies or assemblies will often need special procurement from TEIN Japan. Fulcrum does carry an assortment of second hand strut bodies and assemblies to assist in accident damage and repair. Some accident damaged coil overs may not be repairable.


Fulcrum rebuild price per damper is $150.00 plus any additional parts as required. As a service and, at no extra charge, a re-valve of the damper can be carried out to a customer’s request.

Repair Price includes:

  • Strip & Quote.*
  • Fitment of additional required parts.
  • New oil seals.
  • New oil & a gas recharge.
  • Shock Dyno test.

*Please note that in all instances if the required repairs are not performed a $33.00 per damper charge is levied if the old parts are required to be returned. For safety and quality control reasons Fulcrum cannot, under any circumstances, reassemble dampers submitted for a strip & quote if the repairs are not carried out.


Fulcrum Suspensions TEIn rebuild

TEIN Coilover being remanfactured at Fulcrum Suspensions reman facility. 


How long will it take?

From the time the coil overs are received at the Remanufacturing Department at Moorooka, Brisbane, we require two days to strip & quote. Then from the time Fulcrum is authorised to carry out the repairs, we require two days. These times do not include freight times to and from Moorooka.

How do I deliver the coil overs to Fulcrum?

Any Coil over for a rebuild or re-valve can be taken to any Fulcrum Suspension dealer, for your nearest location please visit our store map

The coil overs can be initially inspected and diagnosed and then freighted to Fulcrum.

Or contact our sales department direct on 1800 385 278 or via email at online@fulcrumsuspensions.com.au to arrange delivery. You can also use the contact form below.

Fulcrum has national arrangements with transport companies and can offer competitive freight rates which can be charged as part of the total job.


Installation Instructions

Click on the links below to view the installation instructions:

VE Commodore Sport Damper Kit

VE Commodore Super Street Kit

EDFC Active Controller Quick Manual


tein coilover being adjusted by fulcrum suspensions

TEIN coilover being adjusted during the revalve process. 


Don't want to get your coilover repaired? Buy a new one instead.
    was $2,050.00 Now: Special Price $1,742.50

Call us on 1800 385 278 to Rebuild, Repair, Service or Customise your TEIN coilovers


Search our Suspension Range

If you would like to get a quote or advice from a suspension specialist, then please give us a call or send us a message. You can also shop our complete range of products through our online shop. We offer Free delivery to all metro locations and have both company stores and dealers spread across Australia, who install our products and specialise in suspension. 

Fulcrum Suspensions Specialises in Suspension

With over 40 years of industry experience, we can get you pointed in the right direction.

FULCRUM's Most Wanted Our Most Searched for Products

Fulcrum's latest news & releases

  • How to install a suspension lift kit - 4WD Action DIY...
    How to install a suspension lift kit - 4WD Action DIY...
      We teamed up with 4WD Action to create an easy to understand guide on how to install your own lift kit. Now if you don’t feel comfortable around tools or don’t want to be held liable for the work done on your car, we strongly recommend you let the professionals do the job for you. Be that as it may, this guide is very straight forward and if you have some knowledge you should be able to install your lift kit with ease.  If...
    Continue Reading...
  • Formula 4x4 Big Bore Review
    Formula 4x4 Big Bore Review
      Formula 4x4 Big Bore Customer Feedback The following is a detailed review of our Formula 4x4 Big Bore shocks absorbers. Sent in by one of customers who is currently toruing the Australian outback.   As part of planning a trip up the Central Arnhem Road and back across the Savannah Way, I needed to replace the OEM shock absorbers on my 2016 Patrol. I contacted Fulcrum Suspensions for advice. They have been my go to suspension...
    Continue Reading...
  • Formula 4x4 Big Bore Shocks Released!
    Formula 4x4 Big Bore Shocks Released!
      Formula 4x4 Big Bore Shocks Released! A new heavy duty shock to handle extreme heats, heavy loads and tough off road conditions, call us on 1800 385 278.  Fulcrum Suspensions launched their own brand of 4x4 shock absorbers onto the market a few years ago. Going strong, a new range of Formula 4x4 heavy duty shock absorbers built specifically to handle extreme heats and extreme rear loads has been released. Perfect for larger 4WDs such...
    Continue Reading...