Find your new suspension & more
Buy suspension online
and get local fitment
Find your cars new suspension & more.
Professional installation included
Your parts are delivered to your nearest Fulcrum outlet and installation is organised — just bring your car and we'll take care of the rest.
Installation timing
Most installs occur within 2 weeks
2 Inch 50mm FOX Performance Series 2.0 Lift Kit to suit Nissan Patrol GU Y61 Coil-Sprung Cab Chassis 1997–2016
Upgrade your Nissan Patrol GU Y61 coil-sprung cab chassis with proven FOX suspension performance. The PAT-029F combines FOX 2.0 Performance Series front and rear shock absorbers with King Springs front and rear coils and a SuperPro caster correction bush kit.
Developed for daily driving, touring, towing and recreational off-road use, this package improves ride control, steering stability and suspension response across sealed roads, corrugations and uneven terrain. It is specifically configured for Patrol cab chassis models fitted with coil springs at both the front and rear.
The FOX 985-24-226 front shock absorbers are vehicle-specific Performance Series 2.0 IFP dampers designed for approximately 0–38mm of front lift. Their stem-to-stem mounting configuration is matched to the applicable Patrol front suspension.
At the rear, FOX 985-24-075 Performance Series 2.0 IFP shock absorbers support approximately 25–64mm of rear lift. Their eyelet-to-eyelet mounting configuration and extended travel complement the coil-sprung rear suspension.
FOX’s Internal Floating Piston design separates the shock oil from the high-pressure nitrogen gas, helping prevent aeration and maintain consistent damping performance. Application-specific valving and a race-developed high-flow piston provide a controlled on-road ride with predictable response over rough tracks and demanding terrain.
The clear-anodised 6061-T6 aluminium shock bodies improve heat dissipation and resist corrosion, while the 5/8-inch hard-chromed shafts and redundant sealing system support reliable operation during sustained touring and off-road use.
King Springs KDFR-42 raised front coils provide the front suspension lift. At the rear, KDPR-58 progressive-rate coils deliver an application-specific spring response for the coil-sprung cab chassis, combining initial compliance with increased support as the suspension is compressed.
The included SuperPro SPF1721K caster correction bush kit provides approximately two degrees of caster correction. This helps restore steering geometry, straight-line stability and steering return following the increase in front ride height. Its heavily voided design also supports improved suspension articulation.
Key features
Kit contents
Important fitment note
PAT-029F is designed for Nissan Patrol GU Y61 cab chassis models fitted with coil springs at both the front and rear.
This kit does not suit:
FOX specifically excludes both shock applications from leaf-spring models. The vehicle’s rear suspension type and shock mounting configuration must be confirmed before quoting, ordering or installation.
Actual ride height may vary depending on the vehicle’s original ride height, permanent accessories, carried load and the condition of the existing suspension components.
After you have purchased this lift kit, one of our suspension experts will contact you to confirm your order details, intended vehicle use, permanent accessory load and vehicle specifications. This helps ensure that the supplied suspension package is appropriate for your vehicle.
When purchasing through our click & fit service, we will also confirm your installation date.
Where applicable, the rear spring rate can be changed to accommodate different permanent loads. To discuss alternative leaf spring options, please call us, send us a message or leave a comment when purchasing the lift kit.
FOX Lift Kit Warranty
FOX lift kits are covered by a 12-month warranty against manufacturing defects, subject to the applicable warranty terms and conditions. Just activate your warranty online. Learn more here.
Premium Lift Kit Packaging and Shipping
This lift kit is supplied through Fulcrum’s Premium Packaging service, designed to protect every suspension component throughout transit and support fast, reliable delivery.Premium Packaging applies to all available delivery methods, including Home Delivery, Click & Fit and Free Pickup through Click & Collect. More information about our premium lift kit packaging is available on this page.
For assistance, call 1800 385 278.
Lift Kit Fitting Instructions
All lift kits are supplied with general fitting instructions and applicable warranty information. Professional installation by a qualified mechanic or suspension technician is strongly recommended. Installation should preferably be completed by a workshop with wheel-alignment facilities.
Springs & Lift Heights
The springs create the lift, so selecting the correct front and rear spring rates is essential for achieving a level stance, comfortable ride and reliable suspension performance. While the kit title specifies a lift height, the final front and rear height increase will depend on your vehicle’s permanent accessories, constant load and intended use.
After you place your order, a Fulcrum Suspensions specialist will contact you before processing it. We will confirm your vehicle details, accessories, regular load, towing requirements and driving conditions to ensure the correct springs are supplied.
A constant load is any weight permanently fitted to or carried in the vehicle, such as bull bars, winches, bash plates, batteries, drawers, canopies, tools and recovery equipment. Engine type and other vehicle specifications can also affect spring selection. Where possible, install all permanent accessories before fitting your lift kit so the suspension can be matched correctly from the outset.
The spring rating should closely match the vehicle’s actual constant load. For example, a vehicle carrying approximately 250kg permanently should use a spring designed for that load range.
Springs rated below the vehicle’s constant load may become overloaded, causing sagging or premature failure. This can also occur when towing, as caravan, boat or trailer ball weight adds load to the rear suspension.
Springs rated substantially above the actual load can produce an excessively firm ride and may contribute to issues such as shock absorber top-out or coil spring trapping. The front and rear springs must also be correctly matched, as an unsuitable spring rate at either end can leave the vehicle sitting nose-high or nose-low.
For occasional additional loads or towing, an airbag helper kit may be recommended. Airbags support the springs when carrying temporary loads but do not replace correctly rated springs and are not designed to carry the vehicle’s load on their own.
There is no need to determine every specification yourself. Our suspension specialists will review your requirements after purchase and confirm the most suitable configuration for your vehicle.
For assistance before ordering, contact us through online chat or call our team.
*All prices shown on the website include GST. You will not be charged any additional fees related to tax. For international orders, GST is removed, local import duties or taxes may apply but will not be charged by us.
| SKU | PAT-029F |
|---|---|
| Foot Note 1 | Kit contains: Fox 2.0 Performance Series Front Shock 2 x 985-24-226, Fox 2.0 Performance Series IFP Rear Shocks 2 x 985-24-075 |
| Foot Note 2 | Kit contains: King Springs 1 x KDFR-42, 1 x KDPR-58, SuperPro Radius Arm To Diff Mount - Offset Bush Kit 1 x SPF1721K |
| Foot Note 3 | Please note matching spring rates with your vehicles weight is critical to performance. If you are unsure of your vehicles rear load or the spring rate you should get. Then please send us a message or call us to make sure you get the right spring rate. |
| Components Per | 1 Kit |
| Sub brand | Formula 4x4 |
| EAN | PAT-029F |
| Warranty | 12 months warranty |
Downloads
Please be advised that our stores do not hold any stock. In order to make sure things go as fast as possible you can purchase your parts online. If you would like to have your parts installed by us please choose Click & Fit at the checkout.
You can use the shipping calculator to find your shipping costs, your closest pick up or install locations. The shipping calculator will also show all shipping and installation prices. Shipping is free if you choose to get your item installed by us.
When our product stock levels are low, or current stock is allocated to orders, our website may show an ‘in-stock’ status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details.
1. Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything for you and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
2. Select “Free Pickup” as a delivery method during the checkout process and you will be given free delivery to your nearest Fulcrum outlet where you can collect the parts. We will text and email you all your tracking details.
3. Select “Deliver to Door” as a delivery method during the checkout process and we will deliver your order direct to your nominated delivery address. We will text and email you all your tracking details.
We offer FREE shipping to all metro areas (excluding WA, TAS and NT).
If you live on the Australian coast, that does not mean you are subject to free shipping.
Express shipping times and free shipping times are only to be counted once the order has been shipped from our warehouses. Our free shipping and express shipping services both have the same order processing times. We first have to raise the order, then we send it to one of our warehouses for processing and once ready it will be shipped from the warehouse. The difference between express and free shipping services, is the time it takes for the item to be transported from our warehouse to your address.
Our free shipping policy is determined by densely populated metro locations and the viability of distance travelled from our distribution centres. We are constantly expanding our warehousing, so areas covered by free shipping are subject to change. See our shipping policy here.
We guarantee the fitment and quality of our products, but if you choose to return an item we offer a generous 60 day returns policy. See our returns policy here.
All products sold by Fulcrum Suspensions are covered by a national warranty. This products warranty is subject to conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Fulcrum Suspensions with a receipt to be eligible for a refund. See full warranty claim criteria here.
Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
Your assigned suspension expert will confirm all the details for your booking. Your parts will then be delivered to your closest Fulcrum workshop and an installation date will be booked based on your preference. You then bring your car on the booking date and the Fulcrum workshop will install your order.
Installation includes full product installation by a qualified technician, a full wheel alignment, a complete suspension check, a visual brake inspection, and a complete report. We also offer a complimentary 1000km check-up service, which includes a suspension check and any retention work, your alignment and tyre wear will also be checked. If we find that anything needs to be amended during our 1000km check, we will carry out this work free of charge. This includes a wheel alignment, if required. Please note that Fulcrum Dealers are independant workshops and may not supply a full suspension report or offer a 1000km checkup. Workshops that are owned by Fulcrum Suspensions will do this for you though.
Throughout your order, installation, and service. You will be kept up to date every step of the way. Fulcrum offers this service to ensure you get the best possible experience.
Most installs occur within 2 weeks. Timing depends on workshop availability, stock levels, and shipping lead times. This 2-week timeframe is not guaranteed. For WA customers, extra transit time from the east coast may push appointments back.
Fulcrum Suspensions Specialises in Suspension
With over 40 years of industry experience, we can get you pointed in the right direction.
Formula 4x4 Front Strut to suit Mitsubishi Triton, Challenger & Pajero Sport
21 minutes ago from Capalaba, AUFormula 4x4 Rear Shock Absorber to suit Mitsubishi Triton MQ 2015-2018
21 minutes ago from Capalaba, AURear standard height King Spring Leafs to suit Ford Falcon AU, BA, BF, FG, FGX XR6 & XR8 Ute
1 hour ago from Morley, AU50mm Formula 4x4 Lift Kit to suit Toyota Hilux 1988-2005
2 hours ago from Edensor Park, AURear raised 100-300kg King Springs to suit Mitsubishi Pajero NM-NX LWB 2000-2021
4 hours ago from Townview, AURear Trailing Arm Upper Adjustable Assembly Kit to Suit Jeep Gladiator JT 2020-on
4 hours ago from Molendinar, AU
